Panels

8ft Panel

Aluminium framed panels with non-reflective matt-plastic-coated boards for easy wash down. Available in a taller option.

Length
8ft
Height
Regular 34in | 0.85m
Tall 36in | 0.9m

Panel with Coupling

Aluminium framed panels with non-reflective matt-plastic-coated boards for easy wash down. Coupling makes yard base connection easy.

Length
8ft
Height
Regular 34in | 0.85m
Tall 36in | 0.9m

Panel with Side Gate

Aluminium framed panel with Let Out/Drafting gate, ideal for drafting or turning sheep when working in the race. A catch on the handle allows the gate to be locked in position if required. Gate available on both sides, left & right.

Length
8ft | 2.5m
Height
36in | 0.9m

Gates

Forcing Gate

Used as part of a small forcing pen to “sweep” sheep in from the main pen, this ensures they stay tight and will move forward as they sense movement into the race.

Width
6ft | 1.8m

Drop-in Gate

Designed to slide in and out of the yard base or Spreader. Ideal for holding sheep in a narrow race.

Width
18in | 0.5m

Guillotine Gate

Ideal for speeding up the job by releasing sheep whilst staying behind them. It also saves a lot of walking and is especially useful with a foot bath. Utilises the same 18in | 0.5m width as the Spreader and Anti-backing Gate.

Width
18in | 0.5m

Anti-backing Gate

Simple spring-loaded bars allow the sheep to flow in one direction but stop them reversing or backing out of the race. Utilises the same width as the Spreader and Guillotine Gate.

Width
18in | 0.5m

Spreaders

Spreader 18in

A great way to make a stable race for foot bathing or any other job where you want to work outside the race. Multi-height lugs allow height adjustment.

Width
18in | 0.5m

Spreader 33in

Locate panels and hurdles to form a sturdy race. Multi-height lugs allow panel height to adjust. Lightweight and strong.

Width
33in | 0.8m

Spreader Gate

Spring-mounted gate with lock shut pin. Spring is over centred to keep the gate either closed or open. Useful at the end of a single drench race.

Width
33in | 0.8m

Hurdles

Aluminium Hurdle 5ft

Aluminium Hurdle with top uprights to prevent leg breakage. Heat treated for strength. Complete with Long Pin. Used for the collecting and drafting pens; also useful for lambing pens. Taller option available.

Length
5ft | 1.5m
Height
Regular 36in | 0.9m
Tall 39in | 1m

Aluminium Hurdle 6ft

Aluminium Hurdle with top uprights to prevent leg breakage. Heat treated for strength. Complete with Long Pin. Used for the collecting and drafting pens; also useful to carry on stock trailers. Taller option available.

Length
6ft | 1.8m
Height
Regular 36in | 0.9m
Tall 39in | 1m

Aluminium Hurdle 7ft

Aluminium Hurdle with top uprights to prevent leg breakage. Heat treated for strength. Complete with Long Pin. Used for the collecting and drafting pens. Taller option available.

Length
7ft | 2.1m
Height
Regular 36in | 0.9m
Tall 39in | 1m

Hurdle Support Post

Use to stabilise the main collecting pen. Two short pins supplied to anchor to the ground.

Supports & Pins

Long/Short Pin

Aluminium standard coupling pin used to connect all our hurdles. Every hurdle and panel comes with one Long Pin. The Short Pin is used to secure the Hurdle Support Post – use two per post to secure to the ground and reduce movement.

Two-way Connector

Use between two opposing hurdle lugs to create a connection.

Three-way Connector

Allows three Hurdles or Panels to be connected. Especially useful when you want to create a pen or spur from a run of Hurdles.

Get in touch for a free no-obligation quote

Our experts will listen carefully to your requirements and help build the right set‐up for you. We can often get in touch with a nearby Rappa yard owner to give you a chance to see one in action. Drop us a message or call us to request a quote.

Get in touch